EL2535-0005 | EtherCAT Terminal, 2-channel PWM output, 24 V DC, 5 A, current-controlled

The EL2535-0005 output terminal controls the output current via pulse width control of the supply voltage. It is electrically isolated from the E-bus. The current values (0 to 5 A maximum output current) are specified by the automation device through a 16-bit value. The output stage is protected against overload and short-circuit. The EtherCAT Terminal contains two channels whose signal state is indicated by LEDs. The light emitting diodes simplify local diagnosis by displaying typical load and wiring faults.

Special features:

2 PWM outputs with push-pull output stage
Suitable for inductive loads > 1 mH
Max. output current per channel at 24 V DC rated voltage
0…5 A

https://www.beckhoff.com/vi-vn/products/i-o/ethercat-terminals/el2xxx-digital-output/el2535-0005.html

Thông tin sản phẩm

el2535-0005

Các sản phẩm cùng loại

EL2252 \| EtherCAT Terminal, 2-channel digital output, 24 V DC, 0.5 A, timestamp	EL2642 \| EtherCAT Terminal, 2-channel reed output, multiplexer, 48 V AC/DC, 0.5 A, potential-free, 1 x 4	EL2794 \| EtherCAT Terminal, 4-channel solid state relay output, 30 V AC, 48 V DC, 2 A, potential-free
EL2798 \| EtherCAT Terminal, 8-channel solid state relay output, 30 V AC, 48 V DC, 2 A, potential-free	EL2535-0050 \| EtherCAT Terminal, 2-channel PWM output, 24 V DC, 50 mA, current-controlledThe EL2535-xxxx output terminals control the output current through pulse width control of the supply voltage. They are electrically isolated from the E-bus. The curr	EL2521-0124 \| EtherCAT Terminal, 1-channel pulse train output, incr. enc. simulation, 24 V DC, 1 A, with capture/compare input/output
EL2634 \| EtherCAT Terminal, 4-channel relay output, 250 V AC, 30 V DC, 4 A	EL2808 \| EtherCAT Terminal, 8-channel digital output, 24 V DC, 0.5 A, 2-wire connection	EL2722 \| EtherCAT Terminal, 2-channel triac output, 12…230 V AC, 1 A

EL2252 \| EtherCAT Terminal, 2-channel digital output, 24 V DC, 0.5 A, timestamp	EL2642 \| EtherCAT Terminal, 2-channel reed output, multiplexer, 48 V AC/DC, 0.5 A, potential-free, 1 x 4	EL2794 \| EtherCAT Terminal, 4-channel solid state relay output, 30 V AC, 48 V DC, 2 A, potential-free
EL2798 \| EtherCAT Terminal, 8-channel solid state relay output, 30 V AC, 48 V DC, 2 A, potential-free	EL2535-0050 \| EtherCAT Terminal, 2-channel PWM output, 24 V DC, 50 mA, current-controlledThe EL2535-xxxx output terminals control the output current through pulse width control of the supply voltage. They are electrically isolated from the E-bus. The curr	EL2521-0124 \| EtherCAT Terminal, 1-channel pulse train output, incr. enc. simulation, 24 V DC, 1 A, with capture/compare input/output
EL2634 \| EtherCAT Terminal, 4-channel relay output, 250 V AC, 30 V DC, 4 A	EL2808 \| EtherCAT Terminal, 8-channel digital output, 24 V DC, 0.5 A, 2-wire connection	EL2722 \| EtherCAT Terminal, 2-channel triac output, 12…230 V AC, 1 A

Thông tin sản phẩm

Sản phẩm

Tỉ giá

Hỗ trợ trực tuyến